DJI Drones Not Turning On or Off: Reason & Solution (2024)

Welcome to this article on DJI drones not turning on or off. DJI is a popular brand of drones that is known for producing high-quality and reliable unmanned aerial vehicles. However, like any electronic device, DJI drones can experience issues from time to time. One of the most common issues is when the drone won’t turn on or off.

This can be frustrating, especially if you’re looking forward to capturing stunning aerial footage or completing an important mission. In this article, we will explore some common reasons why your DJI drone may not be turning on or off and provide some troubleshooting steps you can take to resolve the issue.

Importance of Drones Turning On and Off Properly

As drones become more advanced and widespread, the importance of proper operation and maintenance becomes increasingly crucial. One of the most fundamental aspects of drone operation is the ability to turn it on and off reliably.

In this article, we’ll explore the importance of drones turning on and off properly and the potential risks and consequences of failing to do so. Here are some key points to consider:

• Turning on and off properly helps ensure the safe operation of the drone
• Proper operation reduces the risk of crashes and accidents
• Turning off the drone properly helps conserve battery life and prevent damage to the device
• Failing to turn off the drone properly can lead to overheating, battery damage, and other problems
• If the drone fails to turn on, it can cause delays and disruptions to scheduled flights or missions
• In some cases, improperly turning on or off a drone can cause permanent damage or require costly repairs

By understanding the importance of proper operation and maintenance, you can help ensure the longevity and reliability of your drone.

Read Also, Where DJI Drones Are Made? Origin, Manufacturing & History

Reasons Why DJI Drone Not Turning ON

If you’re having trouble getting your DJI drone to turn on, there could be several reasons why. Some of the most common reasons why your DJI drone won’t turn on include the following:

01 Reason: Dead battery

One of the most common reasons why your DJI drone won’t turn on is a dead battery. If the battery is not charged or has been drained, the drone will not have enough power to turn on.

It’s important to ensure that your battery is fully charged before attempting to use your drone. If the battery is older, it may also need to be replaced. Always check the battery life and consider investing in a spare battery to avoid this issue.

02 Reason: Loose or damaged wiring

Another reason why your DJI drone may not turn on is due to loose or damaged wiring. This can occur if the drone has been dropped or mishandled, causing the wiring to come loose or break.

Check all the connections and cables between the battery and the drone to ensure they are properly connected and not damaged. If there is any damage, it may be necessary to replace the wiring or send the drone in for repair.

03 Reason: Overheating or firmware update failure

Overheating or firmware update failure can also cause your DJI drone to fail to turn on. Drones generate a lot of heat during operation, and if they become too hot, they can shut down to prevent damage. In addition, a failed firmware update can also cause the drone to fail to turn on.

Always make sure to update the firmware using DJI’s recommended methods and avoid using the drone in hot environments for prolonged periods of time. If you suspect a firmware update failure, try to reinstall the firmware or seek assistance from DJI’s customer support.

04 Reason: Malfunctioning power button

A malfunctioning power button can also prevent your DJI drone from turning on. The power button may become stuck or damaged over time, making it difficult or impossible to turn on the drone.

Check the power button to ensure that it is not stuck and is making proper contact when pressed. If the button is damaged, it may need to be replaced or repaired by a professional technician.

05 Reason: Water damage or physical impact

Water damage or physical impact can also cause your DJI drone to fail to turn on. Exposure to water can cause damage to the internal components of the drone, while physical impact can cause damage to the internal wiring or components.

Always avoid flying your drone in wet conditions and handle it carefully to avoid drops or impacts. If your drone has been exposed to water or suffered a physical impact, it’s important to have it inspected and repaired by a professional technician.

Read Also, How To Find The Serial Number On DJI Drones?

Solutions To Fix DJI Drone Won’t Turn ON Issue

If you’re experiencing issues with your DJI drone not turning on, there are several solutions you can try to resolve the problem. Here are some possible solutions to fix your DJI drone won’t turn on the issue:

01 Solution: Check battery level and charging status

To resolve the issue of a dead battery, check the battery level and charging status of your DJI drone. Ensure that the battery is properly charged before attempting to turn on the drone.

If the battery is older, it may need to be replaced. Always keep spare batteries charged and ready to use to avoid any delays or interruptions.

02 Solution: Inspect and tighten all connections and cables

If loose or damaged wiring is the issue, inspect and tighten all connections and cables between the battery and the drone. Ensure that all connections are secure and not damaged.

If there is any damage, consider replacing the wiring or sending the drone in for repair. Proper maintenance and handling can help prevent damage to the wiring and connections.

03 Solution: Allow the drone to cool down and retry the firmware update

If the issue is due to overheating or a failed firmware update, allow the drone to cool down and retry the firmware update.

Ensure that the update is done using DJI’s recommended methods and avoid using the drone in hot environments for extended periods of time. If the issue persists, contact DJI’s customer support for assistance with troubleshooting the firmware update.

04 Solution: Repair or replace the malfunctioning power button

If the power button is malfunctioning, repair or replace it to restore functionality to your DJI drone. The power button may need to be replaced or repaired by a professional technician.

Avoid pressing the button too hard or mishandling the drone to prevent damage to the power button. Proper maintenance and handling can help prevent damage to the power button and other components.

05 Solution: Dry out the drone and perform repairs for water or physical damage

If the issue is due to water damage or physical impact, dry out the drone and perform repairs as necessary. Avoid flying the drone in wet conditions and handle it with care to prevent physical damage.

If the drone has been exposed to water or suffered a physical impact, it has been inspected and repaired by a professional technician to prevent further damage or malfunctions. Proper maintenance and handling can help prevent damage to the drone’s components.

Read Also, DJI Care Refresh: Is it Worth it? Explained In Details

Reasons Why DJI Drone Not Turning OFF

While DJI drones not turning on can be frustrating, experiencing issues with powering off your drone can be just as problematic. There are a few reasons why your DJI drone may not turn off properly, and understanding these issues can help you to identify the cause and find a solution.

Here are some of the most common reasons why your DJI drone won’t turn off:

01 Reason: Firmware update glitch or software bug

One reason why your DJI drone may not turn off properly is due to a firmware update glitch or software bug. This can occur if the firmware update was not downloaded or installed correctly or if there is a software bug that is preventing the drone from powering down.

In this case, you may need to reinstall the firmware update or contact DJI customer support for further assistance.

02 Reason: Malfunctioning power button

Another reason why your DJI drone may not turn off properly is due to a malfunctioning power button. If the power button is not working properly, it may not respond to your attempts to power off the drone, leaving it stuck in an “on” state. In this case, you may need to have the power button repaired or replaced by a professional.

03 Reason: Electrical short circuit

If your DJI drone has suffered from an electrical short circuit, it may not turn off properly. This can occur if there is a fault in the electrical system, such as a damaged wire or component.

In this case, it is important to have the drone inspected by a professional, as attempting to power it off may cause further damage or even pose a safety risk.

04 Reason: Damaged or corroded components

If your DJI drone has been exposed to moisture or other environmental factors, it may cause damage or corrosion to the internal components.

This can prevent the drone from turning off properly, as the damaged or corroded components may be causing electrical issues.

In this case, you may need to have the damaged components replaced by a professional or contact DJI customer support for further assistance.

05 Reason: Interference from external sources

External sources of interference, such as nearby radio or electronic signals, can also cause your DJI drone to not turn off properly.

This can occur if the signals disrupt the communication between the drone and the remote controller, preventing the drone from receiving the command to power off.

In this case, it may help to move the drone to a different location or turn off any nearby electronics that may be causing the interference.

Read Also, Drone Fly Away: Reasons, Solution & Preventive Measures

Solutions To Fix DJI Drone Won’t Turn OFF Issue

If you’re experiencing issues with your DJI drone not turning off properly, there are several potential solutions that you can try.

Here are some of the most common solutions to fix the issue:

01 Solution: Try rebooting the drone and the remote control

One of the first things to try when experiencing issues with turning off your DJI drone is to reboot both the drone and the remote control.

This can help to refresh the system and potentially resolve any glitches or bugs that may be preventing the drone from powering off properly.

To do this, turn off both the drone and the remote control, then turn them back on and attempt to power off the drone again.

02 Solution: Perform a forced shutdown by removing the battery or cutting the power supply

If the first solution doesn’t work, another option is to perform a forced shutdown by removing the battery or cutting the power supply.

To do this, disconnect the battery from the drone or remove the battery entirely, then hold down the power button for several seconds to discharge any remaining power.

Alternatively, you can try cutting off the power supply by unplugging the drone from its charging source or removing any attached batteries or power cables.

This should force the drone to shut down, but it may not be an ideal solution and should only be used as a last resort.

03 Solution: Replace the power button or other faulty components

If the issue is with a malfunctioning power button or other damaged components, the best solution may be to replace the faulty parts.

This will likely require some technical expertise and knowledge of the drone’s inner workings, so it may be best to consult a professional or contact DJI support for assistance.

Depending on the severity of the damage, replacing the affected parts may be a more costly and time-consuming solution, but it can help ensure that the drone is functioning properly and safely.

04 Solution: Seek professional assistance in repairing electrical or software issues

If the issue is related to electrical short circuits or software glitches, it may be best to seek professional assistance in repairing the drone. Attempting to fix these issues without proper knowledge or experience can potentially cause more harm than good.

Contacting DJI support or seeking out a qualified drone repair specialist can help diagnose and fix the issue, ensuring that the drone is operating correctly and safely.

Read Also, Importance of Retrieving a Crashed Drone

Preventive Measures To Avoid DJI Drone Not Turning ON or OFF Issue

Preventive measures can help avoid the frustration and potential damage caused by DJI drones not turning on or off.

By following these tips, drone owners can reduce the likelihood of encountering these issues in the first place.

1. Use genuine DJI batteries and accessories: Using genuine DJI batteries and accessories is crucial for the proper functioning of a DJI drone. Third-party batteries and accessories may not be compatible or could cause damage to the drone, resulting in issues such as the drone not turning on or off. Investing in high-quality, genuine DJI batteries and accessories can help prevent these problems and ensure the longevity of the drone.

2. Store and transport the drone properly: Storing and transporting the drone properly is essential to prevent physical damage, which can cause the drone to malfunction or not turn on/off. Always use a protective carrying case and avoid exposing the drone to extreme temperatures or moisture. Additionally, make sure the drone is turned off, and the battery is removed before storing or transporting it.

3. Keep the drone and its components dry and clean: To prevent water damage and other malfunctions, it’s important to keep the drone and its components dry and clean. Avoid flying the drone in wet or rainy conditions, and use a soft cloth to wipe down the drone and its accessories after each use. Store the drone in a dry and cool place, and ensure that it is completely dry before charging or turning it on.

4. Avoid exposing the drone to extreme temperatures, moisture, or impact: To prevent the DJI drone from turning on or off issues, it’s important to avoid exposing it to extreme temperatures, moisture, or impact. This means storing the drone in a dry and cool place, avoiding flying in harsh weather conditions, and handling it with care during transportation. Additionally, it’s important to ensure that the drone is turned off when not in use to prevent overheating or damage to its components.

5. Keep the software and firmware up-to-date to prevent glitches and bugs: Keeping the software and firmware up-to-date is essential to prevent glitches and bugs that may cause issues with turning on or off the DJI drone. It is recommended to regularly check for updates and follow the instructions for installing them correctly to ensure the drone’s optimal performance.

Read Also, Can a Drone Fly in Strong Winds? (A Complete Guide)

Conclusion

It’s important for your DJI drone to turn on and off properly to ensure its proper functioning and longevity. There can be various reasons why your drone won’t turn on or off, including a dead battery, loose wiring, overheating, malfunctioning power button, water damage, or physical impact.

However, there are several solutions to fix these issues, including checking the battery level, tightening connections, allowing the drone to cool down, repairing or replacing the power button, and repairing water or physical damage.

We hope that these solutions and preventive measures will help you fix your DJI drone and prevent any further issues. Always consult the user manual or seek professional help if you are unsure about any solutions or if the issue persists. Thank you for reading, and happy flying!